Kasco De Icer Temperature Controller | C-10 Model
- MPN:
- 1100225
Description
Automatically Turn Your Kasco De-Icer On When Temperatures Drop
The Kasco C-10 is a simple temperature-based controller designed to automatically operate one 120V Kasco De-Icer as outdoor air temperatures rise and fall.
Instead of leaving your dock de-icer running continuously throughout the winter, set the Kasco C-10 thermostat to the temperature where you want de-icing operation to begin. When the outdoor air temperature falls to the selected setting, the controller turns the connected de-icer on automatically.
When temperatures rise approximately 2.5°F above the selected setting, the controller shuts the de-icer off. This automatic temperature response helps reduce unnecessary operating time while keeping the de-icer ready for freezing conditions.
The Kasco C-10 works well for docks, piers, boat slips, boathouses, pilings, marinas, waterfront structures, and other locations where automatic temperature-based de-icer control is preferred.
Simple Automatic De-Icer Control
Set It Once, Then Adjust as Winter Conditions Change
The Kasco C-10 works on temperature fall. When outdoor air temperature reaches the temperature selected on the thermostat dial, the controller supplies power to the connected de-icer.
The thermostat uses an approximately 2.5°F differential. If the controller turns the de-icer on at 30°F, it will remain on until the outdoor temperature rises to approximately 32.5°F.
This differential helps prevent the controller from rapidly switching on and off when air temperature is hovering around one exact point.
Kasco recommends an initial activation setting of approximately 30°F. Actual settings should be adjusted for your freshwater, saltwater, or brackish-water conditions and the results you observe at your dock.
A Good Starting Point
Start near 30°F, then watch the open-water area and adjust the thermostat based on local weather, water temperature, wind, snow, depth, and ice formation.
0°F to 80°F Range
The broad thermostat range lets the controller be adjusted for different climates and operating requirements.
2.5°F Differential
Once activated, the thermostat remains on until the temperature rises approximately 2.5°F above the selected setting.
8-Foot Power Cord
The Kasco C-10 includes an approximately 8-foot connected power cord for flexible outdoor placement.
One De-Icer Per Controller
Each Kasco C-10 is designed to operate one compatible Kasco De-Icer.
Need the de-icer too? Shop Kasco Dock De-Icers .
Features
Kasco C-10 Features
Temperature-Based Control
The controller automatically turns the connected de-icer on as outdoor temperature falls to the selected setting.
Wide Thermostat Range
Adjust the Kasco C-10 thermostat from approximately 0°F to 80°F.
Automatic Winter Operation
Once installed and adjusted, no manual daily ON/OFF switching is required under normal operation.
Built-In Differential
The approximately 2.5°F differential helps prevent excessive short cycling around the thermostat setting.
8-Foot Cord
An approximately 8-foot connected power cord provides more installation flexibility around the dock or shoreline.
Standard 120V Connection
The controller connects to a properly grounded, GFCI-protected 120V circuit.
Outdoor Installation
The Kasco C-10 mounts vertically and operates with the clear enclosure cover closed.
Simple Adjustment
Turn the thermostat dial to the desired activation temperature. No clock or timer programming is required.
How It Works
How the Kasco C-10 Thermostat Works
The Kasco C-10 monitors outdoor ambient air temperature and controls power to the connected de-icer based on the temperature selected on the thermostat dial.
Temperature Falls
When outdoor air temperature drops to the selected thermostat setting, the Kasco C-10 turns the de-icer on.
De-Icer Circulates Water
The connected Kasco De-Icer begins moving warmer subsurface water toward the surface to help maintain an open-water area.
Temperature Rises
The de-icer remains powered until outdoor air temperature rises approximately 2.5°F above the thermostat setting.
Controller Shuts Off
Once the differential is reached, the Kasco C-10 removes power from the de-icer until temperatures fall again.
Setup
How to Set Up the Kasco C-10
- Mount the controller vertically.
Secure the Kasco C-10 upright on a wall, post, dock structure, or other suitable vertical surface. - Keep it out of direct sunlight.
Direct solar heating can make the thermostat sense a temperature warmer than the surrounding air. - Mount it above the snow line.
Position the controller where snow accumulation will not cover or surround the enclosure. - Leave slack in the power cord.
The included 8-foot power cord should reach the power supply without pulling or placing strain on the plug. - Connect to a protected 120V power source.
Plug the Kasco C-10 into a properly grounded, GFCI-protected 120V circuit. - Allow the thermostat to acclimate.
Wait at least one hour after outdoor installation so the thermostat can adjust to ambient air temperature. - Set the activation temperature.
Turn the thermostat dial to the temperature where you want the de-icer to begin operating. Approximately 30°F is a useful starting point. - Connect the installed de-icer.
Plug the properly installed Kasco De-Icer into the C-10 piggyback connection. - Close the enclosure.
Operate the controller with the cover closed. - Observe operation daily.
Adjust the thermostat if changing winter conditions require more or less de-icing time.
Specifications
Kasco C-10 Specifications
| Product | Kasco C-10 Adjustable Thermostat De-Icer Controller |
|---|---|
| Primary Use | Automatic temperature-based control of one compatible Kasco De-Icer |
| Voltage | 120V |
| De-Icers Controlled | 1 |
| Thermostat Range | Approximately 0°F to 80°F |
| Recommended Initial Setting | Approximately 30°F |
| Operating Method | Activates as temperature falls to the selected thermostat setting |
| Thermostat Differential | Approximately 2.5°F |
| Timer | No |
| Power Cord | Approximately 8 ft |
| De-Icer Connection | Piggyback plug connection |
| Mounting | Vertical surface |
| Power Source | Properly grounded, GFCI-protected 120V circuit |
| Outdoor Acclimation | Allow at least 1 hour before evaluating thermostat operation |
| Warranty | 2-year limited warranty |
Installation
Kasco C-10 Installation Guidelines
Proper placement is important because the controller uses outdoor air temperature to determine when the connected de-icer operates.
Mount Vertically
Install the Kasco C-10 upright on a secure vertical surface using the mounting holes in the enclosure.
Avoid Direct Sun
Install the controller in a shaded location so sunlight does not artificially warm the thermostat.
Stay Above Snow
Mount the enclosure high enough that winter snow accumulation does not cover the controller.
Do Not Stretch the Cord
Install close enough to the power source that the 8-foot cord has slight slack and places no strain on the plug.
For complete setup and operating instructions, review the Kasco C-10 Installation & Operation Manual .
Winter Operating Tips
Get Better Results From the Kasco C-10 and Your De-Icer
The thermostat setting is only one part of successful de-icing. Water depth, de-icer size, mounting angle, current, snow, wind, air temperature, and water temperature can all change the amount of open water created.
Start Near 30°F
A thermostat setting near 30°F is a practical starting point for many freshwater installations. Adjust it based on actual results.
Favor Longer Operation
A de-icer needs time to develop localized water circulation. Longer operating cycles are generally more effective than repeatedly starting and stopping for short periods.
Check After Weather Changes
Heavy snow, stronger wind, falling air temperatures, and shifting ice can change de-icing performance.
Inspect Daily
Check your dock, open-water area, de-icer position, power supply, and ice conditions every day during winter operation.
C-10 vs. C-20
Kasco C-10 vs. Kasco C-20
Both controllers automate a compatible 120V Kasco De-Icer. The main difference is whether you want temperature-only control or control by both temperature and time of day.
| Feature | Kasco C-10 | Kasco C-20 |
|---|---|---|
| Temperature Control | Yes | Yes |
| Thermostat Range | 0°F to 80°F | 0°F to 40°F |
| 24-Hour Timer | No | Yes |
| Time-of-Day Control | No | Yes |
| Power Cord | Approx. 8 ft | Approx. 3 ft |
| Voltage | 120V | 120V |
| Units Controlled | 1 | 1 |
| Best For | Simple automatic temperature-based de-icer operation | Temperature plus scheduled time-of-day operation |
Choose the Kasco C-20 if you also want to restrict de-icer operation to selected times during the day or night.
Need time and temperature control? View the Kasco C-20 De-Icer Controller .
Safety
Kasco C-10 Safety Guidelines
- Connect the Kasco C-10 to a properly grounded, GFCI-protected 120V circuit.
- Use the controller with one compatible Kasco De-Icer only.
- Always operate the de-icer in the water.
- Never operate the de-icer dry on shore or on a dock.
- Keep people and objects away from the de-icer propeller while it is operating.
- Disconnect power before servicing or removing the de-icer.
- Mount the Kasco C-10 vertically.
- Operate the controller with its enclosure cover closed.
- Never lift the controller or de-icer by the power cable.
- Use appropriate warnings and barriers around open-water and thin-ice areas.
- Observe the de-icing area regularly throughout the winter.
Care & Storage
Protect Your Kasco C-10 Between Seasons
Keep the Cover Closed
Operate the Kasco C-10 with the enclosure closed to protect the thermostat and electrical components.
Keep It Shaded
Avoid direct sunlight and nearby heat sources that can affect thermostat readings.
Inspect the Cord
Check the 8-foot power cord, plug, piggyback connection, and enclosure for damage before each winter season.
Store Properly Off-Season
When the controller is no longer needed, disconnect it and store it in a clean, dry location when practical.
Warranty
Kasco C-10 2-Year Limited Warranty
The Kasco C-10 thermostat controller is backed by a 2-year limited warranty against defects in materials and workmanship under normal use and service.
No separate warranty registration is required. Keep the original purchase receipt for warranty coverage.
Need Kasco services, troubleshooting assistance, replacement-part guidance, or help with Kasco equipment purchased from Weeders Digest? Contact Weeders Digest Product Support or call 877-224-4899.
FAQs
Kasco C-10 FAQs
What does the Kasco C-10 do?
The Kasco C-10 automatically controls one compatible Kasco De-Icer based on outdoor air temperature. When the temperature falls to your selected setting, the controller turns the de-icer on.
What temperature range does the Kasco C-10 have?
The Kasco C-10 operates over an approximately 0°F to 80°F thermostat range.
What temperature should I set the Kasco C-10 to?
Approximately 30°F is a practical starting point. Monitor the de-icing area and adjust the setting based on local winter conditions and actual ice formation.
What does the 2.5°F differential mean?
Once the Kasco C-10 turns the de-icer on, the outdoor temperature must rise approximately 2.5°F above the selected thermostat setting before the controller turns it back off.
Does the Kasco C-10 have a timer?
No. The Kasco C-10 is a temperature-only controller. If you want both thermostat and time-of-day control, choose the Kasco C-20.
How many de-icers can one Kasco C-10 control?
One. Each Kasco C-10 is designed to operate one compatible Kasco De-Icer.
What voltage does the Kasco C-10 use?
The controller connects to a properly grounded 120V power source.
Does the Kasco C-10 need GFCI protection?
Yes. The Kasco C-10 should be connected to an approved GFCI-protected circuit.
How long is the Kasco C-10 power cord?
The controller includes an approximately 8-foot connected power cord.
How should I mount the Kasco C-10?
Mount the controller upright on a secure vertical surface. Install it where the power cord has some slack and the enclosure stays above typical snow accumulation.
Can I install the Kasco C-10 in direct sunlight?
Avoid direct sunlight whenever possible. Solar heating can cause the thermostat to sense a warmer temperature than the surrounding outdoor air and affect operation.
Why do I need to wait after installing the controller?
The Kasco C-10 thermostat needs time to adjust to outdoor ambient temperature. Allow at least one hour after installation before evaluating its operation.
Does the Kasco C-10 save electricity?
It can reduce unnecessary run time by shutting the de-icer off when outdoor temperature rises above the thermostat threshold. Actual electrical savings depend on weather, thermostat setting, de-icer size, and site conditions.
Why does my de-icer stay on after the temperature passes the number on the dial?
The Kasco C-10 uses an approximately 2.5°F differential. This means the de-icer remains on until outdoor temperature rises about 2.5°F above the selected activation temperature.
Should the Kasco C-10 turn the de-icer on and off frequently?
No. Longer de-icer operating periods generally establish stronger localized water circulation than frequent short cycles. The built-in thermostat differential also helps limit rapid cycling.
Do I still need to inspect the dock every day?
Yes. The controller automates temperature-based operation, but weather and ice conditions can change quickly. Wind, snow, moving ice, very cold temperatures, and shallow water can affect de-icing performance.
Can the Kasco C-10 prevent all ice damage?
No de-icer or controller can prevent every possible form of ice damage. Moving ice caused by wind or current, extreme cold, very shallow water, and other site conditions can limit de-icing effectiveness.
Can I use the Kasco C-10 with a dock bubbler?
Compatibility depends on the electrical requirements of the equipment being controlled. For a Kasco De-Icer, the C-10 is designed specifically for one compatible 120V unit.
What is the difference between the Kasco C-10 and C-20?
The Kasco C-10 responds only to outdoor temperature and has a 0°F to 80°F thermostat range. The Kasco C-20 combines temperature control with a 24-hour timer, allowing you to control both when and at what temperature the de-icer runs.
What warranty does the Kasco C-10 have?
The Kasco C-10 includes a 2-year limited warranty against defects in materials and workmanship under normal use and service. Keep the original purchase receipt for warranty coverage.
Where can I get Kasco services or product support?
For Kasco services, troubleshooting assistance, installation questions, or help with Kasco equipment purchased from Weeders Digest, contact Weeders Digest Product Support at 877-224-4899.
1 Review
-
Good Product
I use these for winterization systems on docks. They seem to be a good option for our application. I wish the plugs were a slim design or gave you the option to plug in 2 and or a different direction.
Related Products
Kasco Horizontal Float De-Icer
