Kasco De-Icer Thermostat | De-Icer Timers (C-Timers)
Description
Kasco De-Icer Thermostat & Timer Controllers
Take more control over when your Kasco De-Icer operates with the Kasco C-10 thermostat controller or C-20 timer and thermostat controller. These control-panel options automatically operate compatible 120V Kasco De-Icers according to the settings you choose.
Choose the C-10 when you want simple temperature-based operation, or choose the C-20 when you want both temperature and time-of-day control. If you are comparing a Kasco controller with an Ice Eater thermostat, make sure you choose a controller designed for the specific de-icer brand and voltage you own.
Run Your De-Icer When Conditions Actually Require It
A De-Icer does not necessarily need to run continuously all winter. Adding a Kasco De-Icer thermostat or timer gives you greater control over operation and can help reduce unnecessary runtime when temperatures or conditions do not require de-icing.
Automatic Temperature Control
Set an air-temperature threshold and allow the thermostat controller to manage operation as outdoor temperatures change.
Reduce Unnecessary Runtime
Automatic control helps prevent your De-Icer from running continuously when conditions do not require it.
Less Manual Switching
Once configured, the controller can automatically cycle your compatible De-Icer according to the selected settings.
Which Kasco De-Icer Controller Should You Choose?
Both models automate compatible 120V Kasco De-Icers, but they control operation differently.
| Feature | C-10 | C-20 |
|---|---|---|
| Control Type | Thermostat only | Timer + thermostat |
| Temperature Range | 0°F to 80°F | 0°F to 40°F |
| Time-of-Day Control | No | Yes |
| Power Cord | 8 ft. | 3 ft. |
| Voltage | 120V | 120V |
| Best For | Simple automatic temperature-based control | More precise control over both temperature and scheduled runtime |
C-10 Thermostat or C-20 Timer & Thermostat
Kasco C-10
The Kasco C-10 De-Icer thermostat is the simpler of the two control options. It uses outdoor air temperature to determine when your compatible De-Icer turns on and off.
- Adjustable temperature control
- Operating range of 0°F to 80°F
- 8 ft. power cord
- Designed for compatible 120V Kasco De-Icers
- Part number 110225
Kasco C-20
The Kasco C-20 De-Icer controller adds a timer to the thermostat, giving you control over both the outdoor temperature and the time periods when the De-Icer is allowed to operate.
- Adjustable thermostat
- Programmable timer
- Temperature range of 0°F to 40°F
- 3 ft. power cord
- Designed for compatible 120V Kasco De-Icers
- Part number 120350
How the C-10 De-Icer Thermostat Works
The C-10 monitors ambient air temperature. When the temperature falls to the thermostat setting, the connected De-Icer turns on. As temperatures rise above the selected threshold, the controller shuts the unit back off.
This type of thermostat de-icer control helps automate winter operation without requiring you to manually switch your Kasco unit on and off every time outdoor temperatures change.
Install Your De-Icer
Properly install and position the Kasco De-Icer before connecting it to the controller.
Set the Temperature
Select the outdoor air temperature at which you want the De-Icer to begin operating.
Connect the De-Icer
Plug the properly installed compatible Kasco De-Icer into the controller according to Kasco's instructions.
Let It Operate Automatically
The thermostat responds to changing outdoor temperatures and controls De-Icer operation automatically.
How the C-20 Timer & Thermostat Works
The C-20 uses both temperature and time settings. The connected De-Icer operates only when the thermostat and programmed timer conditions are both satisfied.
This makes the C-20 a good choice for waterfront owners who want to limit operation to selected times instead of allowing the De-Icer to run whenever the outdoor temperature reaches the thermostat setting.
Set the Temperature
Choose the outdoor temperature at which De-Icer operation should be permitted.
Set the Timer
Choose the time periods when you want the De-Icer to be able to operate.
Both Conditions Must Be Met
The De-Icer runs when the temperature condition and active timer period occur together.
Ice Eater Thermostat vs. Kasco De-Icer Thermostat
If you searched for “ice eater kasco”, it is important to know that Ice Eater and Kasco are separate de-icer brands. The C-10 and C-20 controllers on this page are Kasco control products intended for compatible Kasco De-Icers.
An Ice Eater thermostat is a different thermostat product commonly used with Power House / Ice Eater equipment. Do not choose a thermostat or timer based only on a similar temperature range. Confirm the brand, voltage and electrical requirements of your specific de-icer before ordering.
Important Installation & Safety Notes
De-Icers are electrical equipment used around water. Always follow the Kasco owner's manual and applicable electrical codes when installing or operating the controller and De-Icer.
- Use a properly grounded and GFCI-protected circuit.
- Never enter the water while the De-Icer or electrical equipment is connected to power or operating.
- Do not add an extension cord or additional power cord unless specifically allowed by the manufacturer.
- Mount the controller in the orientation and location required by the Kasco instructions.
- Protect the controller from flooding and avoid installation locations that could interfere with accurate outdoor-temperature sensing.
Kasco De-Icer Thermostat & Timer FAQs
What does the Kasco C-10 do?
The C-10 is a thermostat-only controller that automatically turns a compatible Kasco De-Icer on or off according to outdoor air temperature.
What does the Kasco C-20 do?
The C-20 combines a thermostat and timer so you can control both the outdoor temperature and time periods when the De-Icer is allowed to operate.
What is the C-10 temperature range?
The C-10 operates over an adjustable temperature range of approximately 0°F to 80°F.
What is the C-20 temperature range?
The C-20 operates over an adjustable temperature range of approximately 0°F to 40°F.
What if I searched “ice eater kasco”?
Ice Eater and Kasco are different de-icer brands. If you own a Kasco De-Icer and need automatic temperature control, the Kasco C-10 or C-20 may be the appropriate controller depending on the features you need.
Is this an Ice Eater thermostat?
No. The products on this page are Kasco C-10 and C-20 controllers. An Ice Eater thermostat is a separate product intended for compatible Ice Eater equipment.
Can I use an Ice Eater thermostat with a Kasco De-Icer?
Do not assume controllers are interchangeable between brands. Match the controller to the de-icer manufacturer's voltage, electrical requirements and installation instructions before use.
What if I searched “thermostat de”?
If you are looking for a thermostat de-icer controller, the Kasco C-10 provides temperature-based control while the C-20 combines thermostat and timer functions for compatible Kasco De-Icers.
Which controller is better for simple operation?
Choose the C-10 if you only need temperature-based automatic control. It is the simpler option because there is no operating schedule to program.
Which controller gives me more control?
The C-20 provides more control because it combines a thermostat with a programmable timer.
Can one controller run multiple Kasco De-Icers?
The C-10 and C-20 are designed to control one compatible De-Icer unit at a time.
Are these Kasco De-Icer controllers 120V?
Yes. The C-10 and C-20 control panels shown here are intended for compatible 120V Kasco De-Icers.
Does the C-20 have both a timer and thermostat?
Yes. The C-20 uses both a programmable timer and an adjustable thermostat to control De-Icer operation.
Is the C-10 a De-Icer timer?
Not exactly. The C-10 is a thermostat controller. If you want both timer and temperature control, choose the C-20.
Can a De-Icer thermostat save electricity?
Automatic control can reduce unnecessary De-Icer runtime by allowing the unit to operate only when the selected temperature or programmed conditions call for operation.
Should I run my De-Icer in very short cycles?
Longer operating cycles generally allow a De-Icer more time to establish useful water circulation than frequent short cycles. Follow Kasco's instructions and adjust operation for your specific conditions.
C-10 or C-20? We Can Help You Choose.
Tell our product specialists which Kasco De-Icer you have and how you want it to operate, and we'll help you determine which thermostat or timer controller best fits your setup.
Call 877-224-4899
Kasco C-10:
- Simple & Easy to use De-icer timer
- Works directly off of air temperature.
- You determine what temperature you would like to see your unit engage and what temperature you'd like it to disengage.
Kasco C-20:
- Gives you the ability to dial in your air temperature.
- Allows you to determine the time frame that you would like to see your Deicer run.
- We suggest that you allow your Deicer to run a minimum of two hours per application
Weeders Digest offers a variety of De-icers & Bubblers / Water Agitators. We also offer the best Timers & Thermostat Control Panels money can buy. Dont forget to check out our De-icing Products including our innovative OSCILLATING ATTACHMENT designed to cover up to 4 times more area using just one de-icer. Visit www.LakeDeicer.com to learn more!
Related Products
