Description
Secure Your Ice Auger to an ATV, UTV or Snowmobile
The Digger Ice Auger Mount is a lightweight, heavy-duty single-auger carrier designed to securely transport your ice auger on compatible ATVs, UTVs, snowmobiles, and four wheelers.
Instead of balancing an auger across the machine, holding it while riding, or letting it bounce loose on a cargo rack, the Digger auger mount gives your auger a dedicated carrying position for trips across frozen lakes, trails, and other ice-fishing terrain.
The Digger Ice Auger Carrier uses molded supports to cradle the auger and an adjustable over-center shaft clamp to hold it firmly in place. Clamp pressure can be adjusted to accommodate different compatible auger shaft sizes.
Its frame is built from high-strength alloy aluminum for a combination of durability and low weight, while the auger supports are designed to reduce scratching during transport.
Digger Auger Mount: Set the Auger in the Rack, Clamp the Shaft, Ride
Secure Different Ice Auger Brands Without a Complicated Locking System
The Digger Ice Auger Mount uses two molded supports to carry the weight of the auger. The center over-clamp then secures the auger shaft so it cannot simply bounce out of the carrier during normal travel.
Clamp pressure is adjustable. This lets you change the amount of holding pressure to better match the shaft diameter of the auger you are carrying.
The design is intended to work with different ice auger brands rather than requiring a brand-specific rack. Weeders Digest has historically used the Digger auger carrier with brands including Jiffy, StrikeMaster, Mako, Eskimo, and other compatible augers.
ATV Ice Auger Mount
Use the Digger as an ATV ice auger mount on a compatible front or rear ATV rack to keep the auger secure and out of the rider area.
UTV Auger Mount
Configure the Digger as a UTV auger mount on compatible machines using the appropriate mounting hardware.
Ice Auger Mount for Snowmobile
Use the Digger as an ice auger mount for snowmobile applications with a compatible bumper or structurally appropriate mounting point.
Built for One Auger
The D-40 is a dedicated single-auger carrier rather than a multi-tool carrying system.
Need to carry an auger plus additional tools? View the Digger All Season 3-Position Carrier .
Features
Digger Ice Auger Carrier Features
Dedicated D-40 Design
The Digger Ice Auger Carrier is designed specifically around securing and transporting one ice auger.
Adjustable Over-Center Clamp
Adjust the clamp pressure to accommodate different compatible auger shaft sizes.
Molded Auger Supports
The auger rests in shaped supports before the center shaft clamp is closed.
Scratch-Resistant Mounts
The supports are designed to help protect the auger where it contacts the carrier.
Alloy Aluminum Frame
High-strength alloy aluminum provides a strong but lightweight Digger auger mount.
Made in USA
The current Weeders Digest Digger auger carrier is listed as Made in the USA.
Auger Compatibility
What Ice Augers Fit the Digger Auger Carrier?
The Digger D-40 is designed around an adjustable shaft clamp rather than a brand-specific connection. This allows the Digger ice auger mount to secure many different auger brands when the auger shaft fits correctly within the carrier.
Jiffy
Compatible Jiffy augers can be carried when the shaft fits securely in the molded supports and adjustable clamp.
StrikeMaster
The adjustable clamp can be set around compatible StrikeMaster auger shafts.
Eskimo
Compatible Eskimo augers can be secured by adjusting clamp pressure to the auger shaft.
Mako & Other Brands
The Digger auger carrier is not restricted to one manufacturer. Always test actual shaft fit before traveling.
Vehicle Compatibility
ATV Ice Auger Mount, UTV Auger Mount & Snowmobile Rack Options
The correct Digger installation depends on the type of machine and the structure available for mounting.
ATV Auger Mount
Use the Digger as an ATV auger carrying system on many compatible metal ATV racks. It can often be positioned on the front or rear when the structure provides a suitable mounting point and safe auger clearance.
Auger Rack for Snowmobile
The Digger can function as an auger rack for snowmobile use on many machines with a compatible rear bumper or similar metal mounting structure.
UTV Auger Mount
UTV compatibility depends on the bed, rack, rail, or mounting structure available on the machine. Use the correct mounting hardware for your application.
Polaris ATV
Most newer Polaris ATVs with composite rack decks use the optional Wrench & Ride mounting system.
Polaris Ranger
Compatible Polaris Ranger and Polaris General UTV applications use the optional Quick Clamp mounting system.
Polaris Mounts
Choose the Correct Polaris Mount for Your Digger Auger Carrier
Wrench & Ride for Polaris ATV
The Wrench & Ride kit uses two rubber expansion plugs to create secure mounting points in compatible composite ATV rack holes.
- Set of 2 expansion plugs
- Designed for compatible composite ATV decks
- Mounting hardware included
- Carrier installation requires drilling two 1/4" holes
Quick Clamp UTV Auger Mount
The Quick Clamp attaches the Digger auger carrier to compatible Polaris Ranger and Polaris General UTV Lock & Ride bed-rail locations.
- Designed for compatible Ranger / General UTV applications
- Uses existing bed-rail mounting locations
- Carrier mounting holes are drilled to 3/8"
- Wing nuts tighten the Quick Clamps into position
Installation
Installing and Adjusting the Digger Ice Auger Mount
Exact installation varies by ATV, UTV, snowmobile, and selected Polaris mount, but the auger-loading process remains similar.
- Choose a safe mounting location.
Select a position that gives the auger adequate clearance from the rider, controls, lights, exhaust, wheels, tracks, suspension, cargo, and moving components. - Secure the Digger auger mount to the machine.
Install the carrier using the mounting hardware appropriate for your rack, bumper, bed rail, or Polaris mounting system. - Confirm the carrier is rigid.
Push and pull the installed rack before loading the auger. The carrier should not slide, rotate, or shift on the machine. - Open the over-center clamp.
Release the center shaft clamp so the auger can be placed into the molded supports. - Set the auger into both supports.
Position the auger so its weight is supported evenly and the shaft aligns naturally with the clamp. - Adjust clamp pressure.
Set the over-center clamp so it closes securely around the auger shaft without excessive force. - Lock the clamp.
Close the clamp completely and confirm the auger cannot lift or bounce free. - Perform a shake test.
Push and pull the auger before moving the vehicle. Reposition or adjust clamp pressure if the auger shifts. - Recheck after riding.
After rough ice, trails, or off-road travel, stop and verify the Digger auger carrier and auger remain secure.
Polaris ATV Install
Wrench & Ride Installation for a Polaris ATV Ice Auger Mount
- Locate the rack openings.
Choose two compatible holes in the Polaris composite rack that position the Digger carrier safely. - Insert the expansion plugs.
Place the rubber side of each Wrench & Ride expansion plug into the selected rack hole. - Tighten the L-brackets.
Tighten the top nut until the rubber expands inside the rack opening and securely holds each bracket. - Position the Digger carrier.
Place the auger carrier against the upright portions of the two installed L-brackets. - Mark both mounting holes.
Use the bracket holes to mark the locations that need to be drilled in the carrier. - Drill the carrier.
Remove the carrier and drill both marked locations with a 1/4-inch drill bit. - Bolt the carrier to the brackets.
Reposition the Digger and secure it with the supplied bolts and lock nuts. - Test before loading.
Check that both expansion plugs and the carrier remain rigid before installing the auger.
Polaris Ranger Install
Quick Clamp UTV Auger Mount Installation
- Position the carrier on the bed rails.
Place the Digger carrier where its base aligns with suitable factory mounting holes in the compatible Polaris bed rail. - Choose the mounting holes.
Determine which carrier-base locations correspond to the bed-rail holes. - Remove the carrier.
Take the rack back off the machine before drilling. - Drill the selected carrier holes.
Drill the carrier mounting locations using a 3/8-inch drill bit. - Insert the threaded bolts.
Install the 3/8-inch threaded hardware through the drilled carrier holes and loosely install the wing nuts. - Place the Quick Clamps into the bed rail.
Align the carrier and Quick Clamps with the selected Lock & Ride-style bed holes. - Tighten the wing nuts.
Secure both mounting points firmly before loading the auger. - Check for movement.
Confirm the UTV auger mount remains rigid and properly positioned on the bed rails.
Specifications
Digger D-40 Ice Auger Carrier Specifications
| Product | Digger Ice Auger Carrier |
|---|---|
| Model / SKU | D-40 |
| Product Type | Dedicated single ice-auger rack and carrier |
| Common Search / Use Terms | Digger ice auger mount, Digger auger mount, ATV ice auger mount, UTV auger mount, snowmobile auger rack |
| Auger Capacity | 1 ice auger |
| Primary Applications | Compatible ATVs, UTVs, snowmobiles, and four wheelers |
| Frame Material | High-strength alloy aluminum |
| Auger Supports | Molded, scratch-resistant supports |
| Retention System | Adjustable over-center shaft clamp |
| Clamp Adjustment | Adjustable holding pressure for different compatible auger shaft sizes |
| Auger Brand Compatibility | Designed to accommodate different ice auger brands when shaft fit is compatible |
| Polaris ATV Mount | Wrench & Ride option for many compatible composite ATV racks |
| Polaris Ranger / General Mount | Quick Clamp option for compatible Lock & Ride UTV applications |
| Made In | USA |
Digger vs. All Season
Digger Ice Auger Mount vs. Digger All Season Carrier
Both products can transport an ice auger, but they are designed for different jobs.
| Feature | Digger D-40 | Digger All Season Carrier |
|---|---|---|
| Primary Purpose | Dedicated Digger ice auger carrier | Multi-purpose seasonal tool carrier |
| Carrying Positions | 1 auger position | 3 carrying positions |
| Ice Auger Use | Yes | Yes |
| Bow / Tool Carrying | Not its primary design | Designed to carry compatible tools, bows, chainsaws, augers, and other equipment |
| Best For | Riders who primarily need a simple dedicated auger mount | Riders who want one rack for multiple seasons and different gear |
Choose the All Season Carrier when you want to carry an auger plus additional compatible equipment or use the rack for hunting, yard work, and other seasons.
Care & Safety
Keep Your Digger Auger Mount Secure Between Trips
Check Mounting Hardware
Inspect bolts, brackets, expansion plugs, clamps, and mounting points before each trip.
Check Clamp Pressure
Make sure the over-center clamp closes firmly around your auger shaft without excessive force.
Inspect the Supports
Look for damage, looseness, or excessive wear where the auger rests in the carrier.
Remove Salt & Slush
Rinse away winter road salt, slush, mud, and other buildup when practical.
Recheck After Rough Travel
Rough ice and trails can loosen mounting hardware. Stop periodically and verify the Digger ice auger carrier and auger remain secure.
Store Dry
Clean and store the carrier away from prolonged moisture when ice-fishing season ends.
FAQs
Digger Ice Auger Mount & Carrier FAQs
What is the Digger Ice Auger Mount?
The Digger Ice Auger Mount, model D-40, is a dedicated single-auger rack designed to transport an ice auger on compatible ATVs, UTVs, snowmobiles, and four wheelers.
Is this the Digger Ice Auger Carrier?
Yes. The Digger Ice Auger Carrier and Digger Ice Auger Mount refer to the D-40 carrier designed to secure one compatible ice auger during vehicle transport.
What is a Digger auger mount?
The Digger auger mount is a lightweight aluminum ice auger rack with two molded supports and an adjustable over-center shaft clamp.
What is the Digger auger carrier used for?
The Digger auger carrier is used to secure one compatible ice auger to an ATV, UTV, snowmobile, or four wheeler during transportation.
What model is this Digger auger carrier?
The current Digger model is the D-40 Ice Auger Carrier.
How does the Digger hold the auger?
The auger rests in molded supports while an adjustable over-center shaft clamp closes around the auger shaft and holds it in position.
Can the clamp be adjusted?
Yes. The pressure of the over-center clamp can be adjusted to accommodate different compatible auger shaft sizes.
Does the Digger fit every brand of ice auger?
The carrier is designed to accommodate different auger brands through its adjustable shaft clamp. Actual compatibility depends on the physical shaft and auger configuration, so always confirm fit before traveling.
Does it work with Jiffy augers?
Compatible Jiffy augers can be carried when the shaft fits correctly in the Digger supports and adjustable clamp.
Does it fit StrikeMaster augers?
Yes, compatible StrikeMaster augers can be secured when the shaft and overall auger configuration fit the carrier correctly.
Does it fit Eskimo augers?
Compatible Eskimo augers can be used when the shaft fits securely within the adjustable clamp.
Can the Digger hold more than one auger?
No. The D-40 is designed as a dedicated single-auger carrier.
Can I use this as an ATV ice auger mount?
Yes. The Digger works as an ATV ice auger mount on many compatible front and rear ATV rack systems. Final fit depends on the rack design, mounting surface, machine, and available clearance.
Can I use the Digger for an ATV auger setup?
Yes. The D-40 is designed for ATV auger transport when installed on a compatible rack. Make sure the auger remains clear of the operator, controls, wheels, suspension, lights, and other equipment.
Can I mount the ATV ice auger carrier on the front or rear?
Many ATV installations can use either a suitable front or rear rack. Choose the location that provides a secure mounting structure and keeps the auger safely clear of the rider and vehicle components.
Can I use it as a UTV auger mount?
Yes. The Digger can be used as a UTV auger mount when the machine has a compatible rack, bed, rail, or mounting structure.
Can I use it as an ice auger holder for snowmobile travel?
Yes. The Digger can function as an ice auger holder for snowmobile applications when the machine provides a suitable and structurally appropriate mounting location.
Can I use it as an auger rack for snowmobile use?
Yes. Many snowmobile installations use a compatible rear bumper or similar metal mounting structure to create a secure auger rack for snowmobile travel.
Is this an ice auger mount for snowmobile use?
Yes. The Digger is designed for compatible snowmobile installations and provides a dedicated ice auger mount for snowmobile riders who want the auger secured outside the rider area.
What do I need for a Polaris ATV?
Many newer Polaris ATVs with composite racks require the Wrench & Ride mounting option. It uses expansion plugs and L-brackets to create mounting points on compatible composite decks.
What do I need for a Polaris Ranger?
Compatible Polaris Ranger and Polaris General UTVs use the optional Quick Clamp system designed around their Lock & Ride-style bed-rail mounting locations.
Is Wrench & Ride included automatically?
No. Select Wrench & Ride in the product options above when it is required for your compatible Polaris ATV installation.
Is the Quick Clamp included automatically?
No. Select the Quick Clamp option when it is required for your compatible Polaris Ranger or General installation.
Does Wrench & Ride require drilling?
Yes. After installing the expansion brackets and positioning the carrier, two mounting locations are marked and drilled through the carrier using a 1/4-inch drill bit.
Does the Polaris Ranger Quick Clamp require drilling?
The current Quick Clamp instructions call for the selected mounting holes in the carrier to be drilled with a 3/8-inch drill bit before the threaded hardware and Quick Clamps are installed.
What is the Digger carrier made from?
The Digger frame is constructed from high-strength alloy aluminum.
Are the auger supports metal?
The carrier uses shaped, scratch-resistant supports where the auger rests, helping reduce direct abrasion against the auger.
Is the Digger Ice Auger Carrier made in the USA?
Yes. The current Weeders Digest product information lists the Digger Ice Auger Carrier as Made in the USA.
Does the carrier come with mounting hardware?
The current Digger listing includes the hardware used for the carrier installation. Polaris applications that require Wrench & Ride or Quick Clamp need the appropriate mounting option selected above.
How tight should I set the auger clamp?
Set the clamp firmly enough that the auger cannot lift, slide, or bounce free, but do not use excessive pressure that could damage the auger shaft or clamp.
What should I check before driving?
Check the vehicle mounting hardware, carrier frame, both auger supports, over-center clamp, and auger position. Make sure everything is tight and the auger cannot contact the rider or moving vehicle components.
Should I check the carrier during a long ride?
Yes. Rough trails, frozen ruts, broken ice, and vibration can loosen hardware over time. Recheck the Digger ice auger mount and clamp periodically.
What is the difference between this and the Digger All Season Carrier?
The Digger D-40 is designed primarily to carry one ice auger. The Digger All Season Carrier has three carrying positions and is designed for different combinations of augers, bows, chainsaws, yard tools, and other compatible equipment.
How does the Digger compare with Jaws of Ice?
Both products are designed to securely transport an ice auger. The Digger D-40 uses molded supports and an adjustable over-center shaft clamp. The Jaws of Ice uses adjustable locking jaws and offers a broader Quick-Attach mounting system. Choose based on your auger, machine, mounting location, and preferred locking style.
Where can I get help choosing the correct Digger auger mount?
Contact Weeders Digest Product Support with your ATV, UTV, or snowmobile model, year, rack type, and ice auger information. Call 877-224-4899 for assistance.
Videos
Digger Ice Auger Mount Videos
See the Digger Ice Auger Carrier installed as an ATV ice auger mount, UTV auger mount, and snowmobile auger rack, and learn how the auger sits in the supports and locks into the adjustable center clamp.
Digger Ice Auger Mount for ATV & Snowmobile
Digger Auger Carrier Demonstration
ATV, UTV & Snowmobile Ice Auger Carrier
Videos
-
Ice Auger Carrier - a rack for you ATV or Snowmobile
http://www.IceAugerCarrier.com Ice Auger Carrier - a rack for ...
-
Digger Ice Auger Carrier
Digger Ice Auger Carrier http://www.IceFishingEquipment.net 87...
-
Ice Auger Carrier, ATV Auger Rack, Auger Holder, Snowmobiles Digger
http://www.ForYourShore.com 877-224-4899 Auger Carrier ATV Au...
-
Ice Auger Rack carrier for ATV or Snowmobile
http://www.IceAugerCarrier.com Ice Auger Rack carrier for ATV ...
8 Reviews
-
Great Auger Rack
I put this on my 2013 Polaris indy 600 works great!!
-
Digger auger mount
These carriers work great! I own 2 of them. Customer service with this company A+. Anytime I need something they are on point !
-
Very nice
Easy to install, and is very sturdy
-
Rugged
Mounted on my Honda Pioneer 500. Works great!
-
awesome auger rack
Easy to install in minutes and works like a charm. I'm very happy with the service and with the product.
Related Products
Digger Universal ATV & Snowmobile Trailer REAR Hitch
Wrench & Ride for Digger Anchor Auger Carrier
