Description

Toon-brite Aluminum Protective Clear-Coat Kit

Everything you need to Clean and Clear-coat most aluminum surfaces. Kit includes ½ gallon of Aluminum cleaner, 3-finger home & garden trigger sprayer, 32fl.oz. Clear-coat and 3” foam applicator.

Designed for the do-it-yourselfer. Removes scum, lime deposits, oxidation and waterline stains. Also works well on most other aluminum surfaces. Simply spray on and hose off. Will make up to one gallon. Biodegradable. For new appearance and protection , follow with Toon-brite, aluminum polish & restorer and/or Toon-brite, Protective Clear-Coat.

Makes re-cleaning a snap. Will work on aluminum, fiberglass, brass, copper, and stainless and most metal surfaces. Rejuvenates and restores faded or oxidized surfaces to “like new” condition. Clear-Coat is easily applied using foam paint brushes or it can be sprayed, Also available in SPRAY ONLY for Manufactures. Clear-Coat will not CHIP, CRACK OR PEEL. The surface must be clean and dry. Note: Clear-Coat is not an Anti-Fouling Paint. Shipped ground only

Features

Cleans, brightens, and Clear-coat and aluminum surfaces
Easy application process
Removes marine deposits, scum, and stains
Protects against corrosive elements
Better value than purchasing separately

FAQ

FAQs

What surfaces is this kit suitable for?

It’s designed for aluminum surfaces—such as pontoon tubes, dock uprights, trailer frames—but it also works on fiberglass, brass, copper and stainless steel.

What’s included in the kit?

The kit includes: ½ gallon of aluminum cleaner, a trigger sprayer, 32 oz of protective clear‑coat, and a 3‑inch foam applicator.

What kinds of stains or damage does the cleaner remove?

It removes oxidation, waterline stains, lime deposits, scum and marine‑type deposits from aluminum surfaces.

What does the Clear‑Coat do?

After cleaning you apply the Clear‑Coat to provide a protective barrier against corrosion, UV rays and future staining. The Clear-Coat will not chip, crack or peel.

Is the application process complicated?

No, it’s designed for DIY use. Clean with the spray‑on cleaner, hose off, allow to dry, then apply the Clear‑Coat with foam applicator or spray. Surface must be clean and dry.

Can this be used on dock aluminum in contact with water?

Yes — though you’ll want to apply when surfaces are dry and free of wet residue. You may need to remove any floating dock/deck hardware or clean around joints. The underside or water‑contact areas should be rinsed thoroughly.

Are there preparation steps before applying the kit?

Yes — ensure the aluminum surface is free from heavy corrosion, loose flakes, or deep pitting. Rinse off sand, grit, or chemicals. It’s best applied in good weather, moderate temperature and away from direct heavy sunlight for best cure of the Clear‑Coat.

What mistakes do users often make?

The kit includes two tools:

Applying the clear‑coat too soon after cleaning, before the surface is fully dry.
Using the kit on heavily pitted, badly corroded aluminum without first repairing the base surface.
Skipping the cleaner and applying Clear‑Coat over oxidation—this reduces adhesion.
Not masking or protecting non‑target surfaces (painted, vinyl, etc) which may be affected by cleaner.

View AllClose