40 gal Filter with Stand, Check Valve & Suction Hose for Irrigation pump (w/ 10 ft intake hose)

(No reviews yet) Write a Review

Description

Description

Lawn Irrigation Pump SUCTION PACKAGE - with Suction hose, 40 Gal Filter & Adjustable Height Stand.

Complete Irrigation/sprinkler pump suction kit comes complete with everything you need to connect to pumps with 2” or 1.5” suction intake.

Quick and Easy Setup!

Kit includes:

40Ga filter with bulk filter matting
2” FPT Check Valve
Filter Stand with adjustable feature
Heavy duty flexible PVC suction hose assembly with quick connects (10ft & 25ft options available)
Reducing adaptor for optional use for pumps that have 1-½” intake.
Works with pumps with 2” or 1.5” suction intake.
For use with pumps that pump up to 40 Ga. per minute.

Filter stand with adjustable height: Allows you to set the height of the filter anywhere between 4” to 12” off bottom depending on bottom conditions. Made of primarily aluminum, Lightweight for easy maneuverability yet offers a large footprint for added stability and includes a sandbag that can optionally be used in areas with strong water movement.

Heavy Duty 40 Gal Big Foot filter: Rated at 40 GPM and Includes a 2” check valve and reusable, replaceable 2” thick bulk filter matting for catching smaller debris that can clog up sprinkler heads.

Suction Hose with Quick Connects: Heavy duty flexible PVC suction hose with quick connects is 33ft long. Hose diameter is 2” (but is also compatible with pumps with 1.5” intake by simply using the included 2" to 1.5" Threaded Reducing Adapter). Hose is fitted with 2” female camlocks and includes a pair of 2” male couplings allowing it to be quickly connected and disconnected to the filter and your pump intake.

FAQ

FAQs

What components are included in the kit?

The kit includes a 40‑gallon heavy‑duty PVC filter tank with replaceable matting, an adjustable height aluminum stand (5″–12″ height adjustment) for stability, a 2″ threaded check valve, and a suction hose (10‑ft intake length in this version) with quick‑connects or you can upgrade to a 33-ft intake length.

What flow rate is this filter rated for?

The 40‑gallon filter is rated for roughly 40 gallons per minute (GPM) under typical clear‑water conditions.

How high off the lake or pond bottom should I position the stand?

The adjustable stand allows you to position the filter from about 5″ to 12″ above the bottom. That helps avoid sediment buildup and makes removal easier.

Why is a check valve included and where does it go?

The check valve prevents backflow and helps the pump stay primed when it’s off. It should be installed on the suction line immediately following the filter.

Can I use this suction hose kit for long runs or elevated lifts?

Yes—but be mindful. Suction hose length, vertical lift, and hose diameter all impact pump performance. The included hose is 10 ft for this model; if you have a longer run or significant elevation change, choose your upgrade accordingly.

What maintenance is required for the filter and matting?

Periodically lift the filter off the stand, rinse or replace the filter matting to remove trapped debris (algae, leaves, sediment). Inspect the check valve and quick‑connects for leaks. Minimal service is required if set up properly.

Will this kit protect my pump from debris or sediment drawn from the lake?

Yes—the filter matting captures and holds small debris, reducing pump wear and the risk of clogging sprinkler heads or irrigation lines. This is especially useful when pulling from lake or pond sources.

How stable is the stand in moving or windy water conditions?

A: The aluminum stand has a wide footprint and includes a sandbag for anchoring in areas with strong water movement. That helps keep the filter stable and prevents tipping or shifting.

Is the 10‑ft intake suction hose sufficient for most residential lake pump setups?

For many setups yes—but if your suction point is a greater distance from the pump, or if you need to reach deeper or across more open water, the 33‑ft version may be preferable. We offer both solutions for your convenience.

What steps should I follow to install the kit properly?

Place the filter stand on a stable base near the water’s edge with the filter tank positioned upright.
Attach the suction hose to the filter and connect the check valve between filter, hose, and pump.
Adjust stand height so the filter inlet is just off the bottom (5″–12″).
Secure suction hose with quick‑connects and prime the pump.
Ensure that there are no air leaks in suction line, maintain hose in a straight path, and monitor performance after start‑up.

View AllClose