75ft Power Cord for 360 Oscillator
Description
75 ft Replacement Power Cord for the 360 Oscillator
This 75 ft replacement power cord powers the AquaThruster™ 360 Oscillator. Use it to replace a cut, chewed, crushed or worn oscillator cord, or to change how far your oscillator sits from its outlet.
The oscillator has its own power cord, separate from the AquaThruster™ motor cord. This cord replaces the oscillator cord only. It does not power the thruster motor.
Need a replacement power supply for your oscillator? See the AquaThruster 12V Transformer.
Pick the Right Cord
Replace a Damaged Cord
Swap out a cut, chewed or crushed oscillator cord.
Choose Your Reach
75 ft of cord to reach your outlet.
Separate From the Motor
Replaces the oscillator cord only.
Need help confirming the right part? Call 877-224-4899.
Cord Lengths
360 Oscillator Cord Options
| Length | Listed For | Power Supply Included |
|---|---|---|
| 25 ft | Oscillator & Nexa 360 | Yes |
| 50 ft | 360 Oscillator | Not listed |
| 75 ft (this cord) | 360 Oscillator | Not listed |
| 100 ft | 360 Oscillator | Not listed |
| 150 ft | Oscillator & Nexa 360 | Yes |
| 200 ft | Oscillator & Nexa 360 | Yes |
Specifications
Specifications
| Product | 75 ft Power Cord for 360 Oscillator |
|---|---|
| Length | 75 ft |
| Powers | Oscillator |
| Power Supply | Not listed |
| Does Not Power | The AquaThruster™ thruster motor (separate cord) |
How to Replace
Replacing the Oscillator Cord
- Unplug the AquaThruster™ motor and the oscillator.
The motor and the 360 Oscillator each have their own power cord. Disconnect both before you touch the unit. - Remove the old cord.
Note how the cord is routed and secured, then disconnect it from the oscillator. - Install the new cord.
Connect the new cord at the oscillator and route it the same way, away from pinch points and sharp edges. - Secure the cord.
Fasten it along the dock so it cannot be pulled or snagged. Add a cord wrap where it rubs. - Restore power and test.
Plug into a GFCI-protected outlet and confirm the oscillator runs as programmed.
Related Tools
Related Parts & Accessories
FAQs
360 Oscillator Cord FAQs
What does the 75 ft 360 cord power?
It powers the AquaThruster™ 360 Oscillator. It is the oscillator cord, not the AquaThruster™ motor cord.
Does this cord include a power supply?
A power supply is not listed with this cord. The 25 ft, 150 ft and 200 ft 360 cords are listed with a power supply included. Call us if you are unsure what your setup needs.
Does it work with the Nexa 360?
This cord is listed for the 360 Oscillator. The 25 ft, 150 ft and 200 ft 360 cords are listed for both the Oscillator and the Nexa 360.
How do I choose the cord length?
Measure the route from your outlet to the oscillator, including the run along the dock and down the pole, and choose the length that reaches without stretching the cord. Do not add an extension cord to make up the difference.
How can I protect the new cord?
Route it away from sharp dock edges and pinch points, and consider a protective cord wrap where it crosses rocks, sand or framing.
Which AquaThruster™ do I have: Original 360 Oscillator or Nexa 360?
The Original AquaThruster™ uses the separate 360 Oscillator attachment, programmed from a white keypad on older units or a black keypad on newer units. The Nexa 360 is the newer integrated system with keypad-controlled rotation and motor tilt, Lift Assist and one-pin Quick-Attach mounting. If you are unsure, call 877-224-4899 with your order information or a photo of the unit.
Who can help me confirm the right part?
Call Weeders Digest Product Support at 877-224-4899 or contact Weeders Digest Product Support. Having your order information and a photo of your unit makes matching the part quick.