Floating Jet Ski Ports PWC Lifts | Wave Armor
Description
Wave Armor Floating Jet Ski Ports
Wave Armor floating jet ski ports give your personal watercraft a stable, buoyant platform to drive onto and roll off of, keeping the hull out of the water when you are not riding.
There is no winch, lift mechanism or air system to run: drive on, and when you are ready to ride, roll off. Ports can connect to a floating dock, sit side by side, or be anchored on their own. Call Weeders Digest at 877-224-4899 for help choosing the right model and connection kit for your PWC and dock.
- Drive-on, roll-off design with no winch or lift mechanism
- Buoyant, stable platform that helps protect your PWC hull
- Rotationally molded, UV-protected polyethylene shell
- Shell filled with marine-grade EPS foam
- Adjustable polyurethane wheels guide the hull on and off
- Bow stop with stainless steel chain and quick clip
- Can attach to a floating dock, to another port, or stand alone
Port Models
Wave Armor builds ports in several sizes so you can match the platform to your watercraft and your slip.
- SLX5: 5' wide; two fit side by side in a standard 10' slip
- SLX6: 6' wide, with an extra 6" on each side for more room to mount and dismount
- EVO Sport: built for smaller, lighter craft such as the Sea-Doo Spark
- EVO5 and EVO6: 5' and 6' widths with EVO-line upgrades, including fourteen 6" polyurethane wheels and stainless steel axles
Connecting Your Port
Ports can integrate with an existing floating dock or be set up as a stand-alone unit. Wave Armor offers connection kits (sold separately) to attach a port directly to a Wave Armor dock, to other floating docks, to another port, or to pipe mounts for a stand-alone or seawall setup.
More About the Floating Jet Ski Ports PWC Lifts | Wave Armor
We are your #1 Minnesota Wave Armor Floating Dock & Jet Ski Port Provider! Visit SHOWROOM in New Hope, MN or CALL us for special pricing & product inquiries.
PH: 763-551-1441 | Get Directions
PRODUCT INFORMATION:
Wave Armor PWC Ports are virtually the only unsinkable drive-on/roll-off PWC docking systems available on the market! We offer a variety of models and sizes for every PWC on the market! Learn about them below.
EVO SPORT
The EVO Sport is specifically designed for smaller, lightweight PWCs (Sea-doo Sparks and Yamaha EX series) or stand up models. This Port features molded in direct connection pockets allowing it to be mounted as close as possible to the dock, creating the cleanest look.
The EVO Sport can stand alone, connect to the Wave Dock System or to other floating dock brands utilizing one of our PWC Port Connection Kits (Sold Separately).
Features
- Rotationally Molded UV Protected Polyethylene Construction
- Foam-Filled Interior (increases buoyancy & structural integrity)
- Integrated Side Pontoons (increases flotation and stability)
- Molded-In Direct Connect Pockets (for easy installation)
- 12 Adjustable Polyurethane Overlaid Nylon Wheels (6″) with Stainless Steel Axle -(corrosion resistant in saltwater)
- Larger & Wider Molded-In Wheel Pockets
- Smart Stop Soft Rubber Bow Stop With Stainless Steel Chain & Quick Clip Tie Down System
- Tan Flagstone Textured Finish
- Molded-In Mounting Pockets In All Corners (for various anchoring)
- Port Length: 11 Ft Long
- Port Width: 58″ Wide
- Weight: 180 Lbs
- Weight Capacity: 900 Lbs
SLX5WAVE PORT
The Wave Port SLX5 PWC (Personal Watercraft) port is designed to integrate with our Wave Dock Floating Dock System and can also be installed as a stand alone system or connect together to other floating dock brands and structures. SLX personal watercraft ports are available in two widths to meet the specific needs of both waterfront home owners and marinas.
Features
- Rotationally Molded UV Protected Polyethylene
- Foam-Filled Interior (increases buoyancy and structural integrity)
- Integrated Side Pontoons (increases flotation and stability)
- Removable Bow Stop with Tie-Down Ring
- 12 Adjustable Polyurethane Overlaid Wheels
- Tan Textured Finish
- Molded-In Mounting Pockets In All Corners (for various anchoring)
- Integrates With Wave Dock System
- Can be utilized as a Stand Alone PWC Port, Connect Together or Attach to Other Floating Docks (utilizing SLX Attachment Kits)
- Port Length: 12 Ft. 8 In. Long
- Port Width: 5 Ft Wide
- Weight: 286 Lbs
- Weight Capacity: 1500 Lbs
SLX6 WAVE PORT
The Wave Port SLX6 Jet Ski PWC (Personal Watercraft) port is designed to integrate with our Wave Dock Floating Dock System and can also be installed as a stand alone system or connect together to other floating dock brands and structures. SLX personal watercraft ports are available in two widths to meet the specific needs of both waterfront home owners and marinas.
Features
- Rotationally Molded UV Protected Polyethylene
- Foam-Filled Interior (increases buoyancy and structural integrity)
- Integrated Side Pontoons (increases flotation and stability)
- Removable Bow Stop with Tie-Down Ring
- 12 Adjustable Polyurethane Overlaid Wheels
- Tan Textured Finish
- Molded-In Mounting Pockets In All Corners (for various anchoring)
- Integrates With Wave Dock System
- Can be utilized as a Stand Alone PWC Port, Connect Together or Attach to Other Floating Docks (utilizing SLX Attachment Kits)
- Port Length: 12 Ft. 8 In. Long
- Port Width: 6 Ft Wide
- Weight: 321 Lbs
- Weight Capacity: 2000 Lbs
We are your #1 Minnesota Wave Armor Floating Dock & Jet Ski Port Provider! Visit SHOWROOM in New Hope, MN or CALL us for special pricing & product inquiries.
Questions About the Floating Jet Ski Ports PWC Lifts?
Call Weeders Digest at 877-224-4899 for help choosing the right equipment for your lake or pond.
Specifications
Floating Jet Ski Ports PWC Lifts | Wave Armor Specifications
| Brand | Wave Armor |
|---|---|
| Construction | Rotationally molded, UV-protected polyethylene shell filled with marine-grade EPS foam |
| SLX5 width | 5' |
| SLX6 width | 6' |
| SLX5 / SLX6 length | 12'8" |
| SLX5 weight | 286 lbs |
| SLX6 weight | 321 lbs |
Related Tools
Products That Work With the Floating Jet Ski Ports PWC Lifts
Related Weeders Digest products to consider with the Floating Jet Ski Ports PWC Lifts.
FAQs
Floating Jet Ski Ports PWC Lifts FAQs
Answers to common questions about the Floating Jet Ski Ports PWC Lifts.
How does a floating jet ski port work?
You drive your PWC up onto the port's wheels and it comes to rest on the floating platform. To ride, you simply roll it back off. There is no winch, motor or air system.
Which size do I need?
The 5' SLX5 is designed so two ports fit side by side in a standard 10' slip. The 6' SLX6 adds 6" on each side for more standing room. The EVO Sport is built for smaller, lighter craft like the Sea-Doo Spark.
Can I attach the port to my dock?
Yes. Wave Armor offers connection kits (sold separately) for Wave Armor docks, other floating docks, port-to-port setups and pipe mounts.
Is it suitable for salt water?
EVO models use stainless steel axles that resist corrosion in fresh and salt water.
Can I take the port out of the water?
Yes. Wave Armor ports are designed to be removed from the water easily.
Need help choosing?
Call Weeders Digest at 877-224-4899.
How do I use the Floating Jet Ski Ports PWC Lifts?
Wave Armor PWC Ports are virtually the only unsinkable drive-on/roll-off PWC docking systems available on the market! We offer a variety of models and sizes for every PWC on the market! Learn about them below.
1 Review
-
Wave Armor SLX5 PWC Port
I purchased 2 SLX5 ports in early 2018. Have to say its the best purchase I have made. My 11 year old can put our PWC on and off the port no problem at all. So user friendly and the number of inquiries I get from my neighbors is crazy. They aren't the cheapest option for PWC lifts, but definitely the best and worth every cent.
Related Products
