Description

Complete Manual Lake Weed Removal System

Lake & Pond Weed Cutting, & Removal Kit

The Lake Weed Cleanup Kit combines two of Weeders Digest's most useful manual aquatic weed tools: the razor-sharp WeedShear lake weed cutter and the heavy-duty RakeZilla lake rake.

The system solves both halves of manual lake weed removal. WeedShear cuts rooted aquatic vegetation near the bottom. RakeZilla then gathers the cut weeds, skims floating vegetation, scoops heavy piles and helps clean up the shoreline.

Two-tool system for cutting and removing aquatic weeds
49-inch V-shaped WeedShear cutting width
RakeZilla 40-inch rake head with long 9-inch tines
Two separate 25 ft. ropes included
RakeZilla float kit included for surface skimming
Choose a 7 ft. or 11 ft. RakeZilla handle
WeedShear blade sharpener included
Works from shoreline, docks, shallow water and suitable boat positions

49"WeedShear cutting width

40"RakeZilla head width

9"RakeZilla tine length

25 ft.Rope with each tool

The Cut & Collect Method

Cut Throw or position WeedShear so the V-shaped stainless blades reach the base of the unwanted aquatic vegetation.

Pull Retrieve WeedShear with a controlled pulling or jerking motion to slice through the vegetation.

Collect Use RakeZilla to rake submerged cut weeds or attach the float kit to skim material from the surface.

Remove Scoop the collected vegetation from the shoreline instead of allowing it to drift away or decay back into the water.

Why Two Tools Work Better

Cutting the Weed Is Only Half the Cleanup

A weed cutter can quickly sever dense vegetation, but the cut material still needs to be removed. Pairing WeedShear with RakeZilla gives you a practical workflow for both jobs.

Cut at the Base

WeedShear sinks through the water and uses its razor-sharp V-shaped blades to cut rooted vegetation near the lake or pond bottom.

Rake the Bottom

RakeZilla's 9-inch tines reach through submerged vegetation and help gather loose or freshly cut weeds.

Skim the Surface

Attach RakeZilla's included float kit to collect cut weeds, algae and debris floating on the water.

Scoop It Out

RakeZilla also works like a large cleanup fork, making it easier to load wet vegetation into a wheelbarrow, cart or disposal pile.

Cut First. Then Clean It Up.

WeedShear and RakeZilla Are Designed to Work as a Two-Step Weed Removal System

The biggest advantage of this kit is that each tool handles a different part of the same job. WeedShear cuts the rooted vegetation first. RakeZilla then follows behind to gather the loose weeds, skim floating pieces and remove the material from the water.

Step 1: Cut the Weeds

Start With WeedShear

Throw or position WeedShear beyond the weed bed, let the V-shaped stainless blades sink toward the bottom, then pull it back through the vegetation. The wide 49-inch cutting path slices rooted aquatic weeds near the base instead of forcing you to pull each plant by hand.

That cutting step opens the area quickly, but it also creates loose vegetation that needs to be removed. This is where RakeZilla becomes the second half of the system.

49-inch V-shaped stainless cutting path
Cuts rooted weeds near the lake or pond bottom
25 ft. retrieval rope lets you reach beyond normal handle distance
Useful for milfoil, hydrilla, lily pads and other aquatic vegetation
Included sharpener helps maintain the cutting edge

Step 2: Rake Out the Cut Weeds

Follow With RakeZilla

Once WeedShear has cut the vegetation, use RakeZilla to pull the loose weeds out of the water. Its 40-inch head and long 9-inch curved tines are built to catch and hold cut vegetation as you drag it toward shore or a dock.

If the cut weeds rise to the surface, attach the included float kit and use RakeZilla as a large skimmer. When the weeds pile up along the shoreline, use the rake like a cleanup fork to scoop the wet material into a wheelbarrow, cart or disposal pile.

40-inch extra-wide rake head
9-inch long curved tines
25 ft. throw and retrieval rope
Detachable float kit for surface skimming
7 ft. or 11 ft. handle option

Why the two-step process matters

Cutting weeds without removing them can leave a large amount of loose vegetation floating around your waterfront. WeedShear handles the cutting quickly, then RakeZilla gives you the reach, width and tine depth needed to collect that material before it drifts, washes back onto the beach or settles and decays.

One Complete Cleanup Process

Cut the Rooted Growth, Then Remove Everything You Just Cut

Instead of trying to make one tool do everything, this kit separates lake weed removal into two simple jobs. WeedShear opens the area by cutting the growth. RakeZilla finishes the job by getting the cut weeds out of the water.

1. Cut a Wide Path

Use WeedShear to slice through a broad section of rooted aquatic weeds near the bottom with each pull.

2. Let the Weeds Loosen

After cutting, the vegetation becomes easier to rake, skim and move because it is no longer anchored to the lake bottom.

3. Rake and Skim

Use RakeZilla on the bottom for submerged cut weeds or attach the float kit to collect vegetation that rises to the surface.

4. Get It Out of the Water

Pull the weeds to shore and scoop them into a cart or disposal pile so they are not left to drift or break down back into the lake.

A Better Manual Weed Removal Workflow

WeedShear Does the Cutting. RakeZilla Does the Cleanup.

Dense aquatic weeds are difficult to rake while they are still rooted. Cutting them first changes the job completely. WeedShear severs the growth near the bottom so the vegetation becomes loose and much easier to retrieve.

RakeZilla then gives you three ways to finish the cleanup: rake submerged material, skim weeds floating on the surface, or scoop heavy piles after they reach the shoreline.

That cut-then-rake sequence is what makes the kit especially useful for swim areas, docks, boat-access zones and manageable shoreline weed beds.

For submerged cut weeds

Use RakeZilla without the float and drag the long tines through the bottom area where WeedShear just cut the vegetation.

For floating cut weeds

Attach the float kit and skim across the surface to gather loose vegetation before wind and waves spread it across the lake.

For the cleanest result, remove the cut weeds from the water.

Do not stop after cutting. Raking and disposing of the cut vegetation is the step that finishes the cleanup and keeps the material from settling back into the area.

Complete the Job

Removing Cut Vegetation Matters

Leaving cut aquatic weeds in the water can allow plant fragments to drift, wash into neighboring areas or decay back into the lake. The cleanup step is a major reason this two-tool kit works better than using a cutter alone.

Cleaner Shoreline

Keep Cut Weeds From Piling Up

Rake or skim freshly cut vegetation before wind and waves push it back onto your beach, dock or neighboring shoreline.

Less Organic Debris

Remove Material Before It Decays

Taking cut vegetation out of the water reduces the amount of plant material left to decompose into organic bottom buildup.

Responsible Cleanup

Check Local Rules

Some states or waterbodies regulate aquatic vegetation cutting and disposal. Check applicable local and state requirements before beginning mechanical weed removal.

Manual Aquatic Weed Control Kit

One Tool Cuts. The Other Gets the Weeds Out of the Water.

The Lake Weed Cleanup Kit gives shoreline owners a straightforward manual system for attacking aquatic weeds without relying on powered cutting equipment.

Use WeedShear to sever the growth, then use RakeZilla to rake, skim, scoop and remove the material from the area you want to enjoy.

What's Included

Two Complete Weed Removal Tools

What Comes in the Lake Weed Cleanup Kit?

WeedShear

Lake Weed Cutter

49-inch V-shaped stainless steel aquatic weed cutter
Convertible handle / extension sections
25 ft. polypropylene retrieval rope
Hand-held blade sharpener
Protective gloves in the current WeedShear configuration

RakeZilla

Lake Rake, Skimmer & Cleanup Fork

40-inch heavy-duty rake head
9-inch curved tines
Your selected 7 ft. or 11 ft. handle configuration
25 ft. throw/retrieval rope
Detachable surface-skimming float kit

Handle selection applies to RakeZilla.

The current kit lets you select the standard 7 ft. two-piece rake handle or upgrade to the 11 ft. three-piece rake handle.

Specifications

Side-by-Side Specs

WeedShear & RakeZilla Specifications

Specification	WeedShear	RakeZilla
Primary Job	Cut rooted aquatic weeds near the bottom	Rake, skim, collect and scoop weeds/debris
Working Width	49 in. / over 4 ft.	40 in.
Cutting / Tine Material	Stainless steel blades	Heavy-duty agricultural-style polymer/nylon tines with aluminum rake structure
Tine Length	Not applicable	9 in.
Listed Tine Count	Not applicable	20
Approximate Weight	About 8–9 lb.	Approximately 7–9 lb. depending on handle configuration
Handle	Convertible multi-section handle for shallow/deep-water use	7 ft. or 11 ft. option
Rope	25 ft. polypropylene rope	25 ft. throw/retrieval rope
Float Kit	No	Yes, detachable
Included Maintenance Item	Hand-held blade sharpener	No sharpening required for polymer tines
Common Applications	Milfoil, hydrilla, lily pads and other rooted aquatic vegetation	Cut weeds, floating vegetation, algae, leaves, debris and shoreline cleanup

How to Use

Cut, Collect & Remove

How to Use the Lake Weed Cleanup Kit

Use the cutter and rake as a sequence rather than treating them as two separate tools.

Identify the Weed Bed

Determine the section of shoreline, swim area or dock zone you want to clear and verify that mechanical cutting is appropriate for the vegetation and local rules.

Cut With WeedShear

Throw or position WeedShear beyond the target vegetation, allow it to sink, then pull it back with a controlled jerking motion so the V-shaped blades cut near the bottom.

Repeat in Sections

Work across the weed bed systematically instead of trying to clear an entire shoreline in one throw.

Switch to RakeZilla

Once vegetation has been cut, use RakeZilla to retrieve material from the bottom or attach the float for surface skimming.

Pull Material to Shore

Use the handle for nearby cleanup or attach the 25 ft. rope for toss-and-retrieve raking farther from shore or a dock.

Scoop Heavy Piles

Use RakeZilla like a large aquatic cleanup fork to move wet vegetation into a wheelbarrow, cart or designated disposal area.

Inspect for Missed Growth

Check the cleared area for rooted vegetation that still needs cutting and repeat the process where needed.

Rinse & Store

Remove plant residue, rinse both tools, sharpen WeedShear as needed and store the blades covered and the rake protected from unnecessary bending.

Do not throw WeedShear toward people, pets, docks with exposed cables or underwater electrical equipment.

The stainless blades are intentionally razor sharp. Keep the work area clear and use protective gloves when handling the cutter.

Rake Handle Options

Choose Your RakeZilla Reach

7 ft. vs. 11 ft. RakeZilla Handle

7 ft.

Standard Two-Piece Handle

A strong general-purpose choice for shoreline, dock and shallow-water cleanup.

Easier to maneuver in tighter areas
Good for normal shoreline raking
Still includes the 25 ft. rope for longer toss-and-retrieve use

11 ft.

Three-Piece Handle Upgrade

Choose the longer handle when additional reach matters more than compact handling.

Additional reach from docks and shore
Useful in deeper or wider cleanup areas
Sections can be removed when the full length is not needed

FAQs

Buyer Questions

Lake Weed Cleanup Kit FAQs

What tools are included in the kit?

The kit includes WeedShear, a razor-sharp 49-inch aquatic weed cutter, and RakeZilla, a 40-inch heavy-duty lake rake/skimmer with 9-inch tines. Each tool includes a 25 ft. rope, and RakeZilla also includes a float kit.

Why do I need both a cutter and a rake?

The WeedShear cuts rooted vegetation near the bottom. RakeZilla handles the cleanup afterward by gathering submerged cut weeds, skimming floating material and scooping piles out of the water.

What types of weeds can WeedShear cut?

Common applications include milfoil, hydrilla, lily pads and other submerged or emergent aquatic vegetation. Weed type, stem thickness and growth density affect how easily it cuts.

How wide a path does WeedShear cut?

The V-shaped blade assembly is approximately 49 inches wide, giving it a cutting path of a little over 4 feet with each pass.

How do I use WeedShear?

Toss or position it beyond the target weed bed, let it sink to the bottom, then retrieve it with a controlled jerking or pulling motion so the blades cut through vegetation near the base.

Does RakeZilla cut weeds too?

RakeZilla can pull some stems and roots from softer bottoms, but its main purpose in this kit is collecting, skimming and removing vegetation after cutting.

Can RakeZilla skim weeds floating on the surface?

Yes. Attach the included float kit so the rake stays near the surface, then use the handle or 25 ft. rope to retrieve floating cut weeds, algae and debris.

Should I choose the 7 ft. or 11 ft. rake handle?

Choose the 7 ft. handle for easier handling and normal shoreline work. Choose the 11 ft. option when you regularly need additional reach from shore or a dock.

Do I need to remove the weeds after I cut them?

Removing the cut vegetation is strongly recommended. It keeps fragments from drifting, reduces the amount of plant material left to decay in the water and may be required by local rules in some areas.

Does this kit remove deep muck?

No. RakeZilla can retrieve light organic material and loose muck with vegetation, but this kit is primarily for aquatic weed cutting and cleanup. Deep muck removal requires a different mechanical or biological approach.

Can I use the kit from a dock?

Yes. Both tools can be used from suitable docks. Make sure the WeedShear casting area is clear of people, boats, cords and underwater electrical equipment before throwing it.

Is WeedShear safe?

It is designed as a cutting tool and uses razor-sharp blades. Adult use, protective gloves, a clear casting area, blade covers during storage and careful handling are important.

How do I maintain the tools?

Rinse vegetation and debris off after use. Use the included sharpener to maintain WeedShear's cutting edges as needed. Store WeedShear with the blades protected and keep RakeZilla stored so the tines are not left under load.

Is this kit best for a small area or a large lakefront?

It is especially practical for shoreline areas, swim zones, boat slips and manageable weed beds. Very large acreages or extremely dense vegetation may be more efficiently handled with powered cutting or harvesting equipment.

Warranty & Guarantee

Product Coverage

WeedShear & RakeZilla Coverage

WeedShear

Replacement Warranty

The current Lake Weed Cleanup Kit page lists a 2-Year Replacement Warranty for WeedShear for qualifying non-commercial use.

RakeZilla

Current Standalone Warranty

The current standalone RakeZilla product page lists a 10-Year Replacement Warranty. Commercial-use exclusions and normal warranty terms apply.

Money Back Guarantee

The current cleanup-kit product information states that both WeedShear and RakeZilla are backed by the Weeders Digest Money Back Guarantee.

Compare Other Lake Weed Tool Packages

View AllClose

Videos