50' Power Cord, Yellow Nut 220v
Description
50' Power Cord, Yellow Nut 220v
Original AquaThruster
50' Power Cord, Yellow Nut 220v
AquaThruster™ & Kasco Motor Power Cord
Horsepower Motor Model Series
1/2 HP 2400 series
3/4 HP 3400 series
1 HP 4400 series
50 ft Replacement Motor Power Cord
This 50 ft replacement power cord is for 220V AquaThruster™, De-Icer and Sure-Flo motors (Yellow Nut version). Use it to replace a cut, chewed, crushed or worn motor cord, or to reach a farther outlet without an extension cord.
This cord is listed for 220V AquaThruster™, De-Icer and Sure-Flo motors (Yellow Nut version) and is used on AquaThruster™, De-Icer and Sure-Flo motors. Match the motor model series and horsepower on your motor label before ordering.
50 ft 220V Yellow Nut
50' Power Cord, Yellow Nut 220V.
Before You Order
Match the model series This cord is listed for 220V AquaThruster™, De-Icer and Sure-Flo motors.
Match the voltage This cord is 220V.
About the nut color This is the Yellow Nut version. Nut colors identify cord length and horsepower only.
Measure the run Measure from the outlet to the motor along the actual cord route.
No extension cords Choose a cord that reaches the outlet directly.
Motor Series & Horsepower
Kasco / AquaThruster™ motor model numbers identify the horsepower. Use this chart with your motor label:
| Motor Model Series | Horsepower |
|---|---|
| 2400 series | 1/2 HP |
| 3400 series | 3/4 HP |
| 4400 series | 1 HP |
| 8400 series | 2 HP |
FIX
Replace a Damaged Cord
Get a damaged motor back into safe service.
50ft
Reach Your Outlet
50 ft of cord to reach your power source.
HP
Matched to the Motor
Listed for 220V AquaThruster™, De-Icer and Sure-Flo motors.
Electrical safety first. Always unplug the motor before handling the cord or connector. Plug into a GFCI-protected outlet, and never operate equipment with a damaged cord.
A sealed connection matters. The motor end of the cord must be seated and sealed correctly for submerged use. If you are not comfortable replacing it, call us at 877-224-4899.
Protect your new cord: the Protective Cord Wrap is a split-wrap braided sleeve that installs without removing plugs.
Need help confirming the right part? Call 877-224-4899.
Shop Protective Cord WrapBrowse All Replacement Parts
Need Help?
Questions About the 50' Power Cord, Yellow Nut 220v?
Call Weeders Digest at 877-224-4899 for help choosing the right equipment for your lake or pond.
Compatibility
Compatibility
Compatibility
Will This Cord Fit My Motor?
| Motor Model Series | Horsepower |
|---|---|
| 2400 series | 1/2 HP |
| 3400 series | 3/4 HP |
| 4400 series | 1 HP |
| 8400 series | 2 HP |
This cord: 220V AquaThruster™, De-Icer and Sure-Flo motors, 220V, Yellow Nut.
Specifications
Specifications
Specifications
Specifications
| Product | 50' Power Cord, Yellow Nut 220V |
|---|---|
| Length | 50 ft |
| Listed For | 220V AquaThruster™, De-Icer and Sure-Flo motors |
| Voltage | 220V |
| Version | Yellow Nut |
| Used On | AquaThruster™, De-Icer and Sure-Flo motors |
How to Replace
How to Replace
How to Replace
Replacing a Motor Cord
- Unplug the motor.
Disconnect the motor cord from the outlet and pull the unit from the water before touching the cord or connector. - Confirm the replacement.
Compare the model series, voltage and length on your old cord and motor label to this cord. - Disconnect the old cord.
Follow the cord replacement procedure for your motor. Keep the connection area clean and dry. - Install the new cord.
Seat and secure the connection fully so it is sealed before the motor goes back in the water. - Route and secure the cord.
Keep it away from pinch points and sharp edges, and add a cord wrap where it rubs. - Test in the water.
Return the motor to the water, plug into a GFCI-protected outlet and confirm normal operation.
Related Tools
Products That Work With the 50' Power Cord, Yellow Nut 220v
Related Weeders Digest products to consider with the 50' Power Cord, Yellow Nut 220v.
FAQs
50' Power Cord, Yellow Nut 220v FAQs
Answers to common questions about the 50' Power Cord, Yellow Nut 220v.
Which motors does this 50 ft cord fit?
It is listed for 220V AquaThruster™, De-Icer and Sure-Flo motors. Check the model number on your motor label to confirm the series.
How do I know my motor horsepower?
Use the model series on your motor label: 2400 series is 1/2 HP, 3400 series is 3/4 HP, 4400 series is 1 HP and 8400 series is 2 HP.
What voltage is this cord?
This cord is listed as 220V.
Can I use an extension cord instead of a longer cord?
We do not recommend it. Choose a cord long enough to reach a GFCI-protected outlet directly.
Should I replace a cord with a nicked jacket?
Yes. Waterfront motor cords should be replaced when the jacket is cut, chewed, crushed or otherwise damaged. Unplug the unit and stop using it until the cord is replaced.
What does the yellow nut mean?
Cord nut colors identify cord length and horsepower only. Always confirm the model series and voltage before ordering.
Is this cord for 120V motors?
No. This is the 220V Yellow Nut cord. For 120V motors, see the Blue Nut and Red Nut 120V cords.
Who can help me confirm the right part?
Call Weeders Digest Product Support at 877-224-4899 or contact Weeders Digest Product Support. Having your order information and a photo of your unit makes matching the part quick.