75ft CORD for 1HP (4400 model motors)
Description
75 ft Replacement Motor Power Cord for 1 HP
This 75 ft replacement power cord is for 1 HP (4400 series) Kasco / AquaThruster™ motors. Use it to replace a cut, chewed, crushed or worn motor cord, or to reach a farther outlet without an extension cord.
This cord is listed for 1 HP (4400 series) Kasco / AquaThruster™ motors and is used on Kasco / AquaThruster™ motors. Match the motor model series and horsepower on your motor label before ordering.
Check your voltage. AquaThruster™ motors are available in 110V and 220V. Confirm the voltage on your motor label, or call us, before ordering.
Before You Order
Motor Series & Horsepower
Kasco / AquaThruster™ motor model numbers identify the horsepower. Use this chart with your motor label:
| Motor Model Series | Horsepower |
|---|---|
| 2400 series | 1/2 HP |
| 3400 series | 3/4 HP |
| 4400 series | 1 HP |
| 8400 series | 2 HP |
Replace a Damaged Cord
Get a damaged motor back into safe service.
Reach Your Outlet
75 ft of cord to reach your power source.
Matched to the Motor
Listed for 1 HP 4400-series motors.
Need help confirming the right part? Call 877-224-4899.
Compatibility
Will This Cord Fit My Motor?
| Motor Model Series | Horsepower |
|---|---|
| 2400 series | 1/2 HP |
| 3400 series | 3/4 HP |
| 4400 series | 1 HP |
| 8400 series | 2 HP |
Specifications
Specifications
| Product | 75ft Cord for 1HP (4400 Model Motors) |
|---|---|
| Length | 75 ft |
| Listed For | 1 HP 4400-series motors |
| Voltage | Confirm with your motor label |
| Used On | Kasco / AquaThruster™ motors |
How to Replace
Replacing a Motor Cord
- Unplug the motor.
Disconnect the motor cord from the outlet and pull the unit from the water before touching the cord or connector. - Confirm the replacement.
Compare the model series, voltage and length on your old cord and motor label to this cord. - Disconnect the old cord.
Follow the cord replacement procedure for your motor. Keep the connection area clean and dry. - Install the new cord.
Seat and secure the connection fully so it is sealed before the motor goes back in the water. - Route and secure the cord.
Keep it away from pinch points and sharp edges, and add a cord wrap where it rubs. - Test in the water.
Return the motor to the water, plug into a GFCI-protected outlet and confirm normal operation.
Related Tools
Related Parts & Accessories
FAQs
Motor Power Cord FAQs
Which motors does this 75 ft cord fit?
It is listed for 1 HP 4400-series motors. Check the model number on your motor label to confirm the series.
How do I know my motor horsepower?
Use the model series on your motor label: 2400 series is 1/2 HP, 3400 series is 3/4 HP, 4400 series is 1 HP and 8400 series is 2 HP.
What voltage is this cord?
The listing does not specify voltage. AquaThruster™ motors come in 110V and 220V versions, so confirm your motor voltage with us before ordering.
Can I use an extension cord instead of a longer cord?
We do not recommend it. Choose a cord long enough to reach a GFCI-protected outlet directly.
Should I replace a cord with a nicked jacket?
Yes. Waterfront motor cords should be replaced when the jacket is cut, chewed, crushed or otherwise damaged. Unplug the unit and stop using it until the cord is replaced.
Who can help me confirm the right part?
Call Weeders Digest Product Support at 877-224-4899 or contact Weeders Digest Product Support. Having your order information and a photo of your unit makes matching the part quick.